1. The operator must have a qualification certificate for the operation of the plastic filament extruding machine, and it is strictly forbidden to operate on the machine by undocumented personnel.
2. The operator must perform productive processing operations on the designated equipment, and it is strictly forbidden for non-machine personnel to operate on the machine or operate in series.
3. The operator must be familiar with the basic technical parameters and performance indicators of this equipment.
4. Operators must be loyal to their duties, conscientious and responsible, and be proficient in the operation, maintenance and maintenance of this equipment.
5. The operator must continue to sum up and study, and seek continuous improvement of their own quality.
6. Safe operation
7. The operator must wear gloves to work to prevent the workpiece from burning fingers and affecting product quality.
8. Before starting the machine, check the air supply (5kg/cm2) of the equipment carefully, check whether the air supply pipeline is leaking, and drain the water in the air filter.
9. Install the drawing abrasive belt correctly (the direction of the arrow on the inside of the drawing abrasive belt should be the same as the arrow on the drawing roller). Carefully check whether the upper and lower bearing seats and the lifting screw are well lubricated, and make sure that there is no one on the front of the discharge before starting the machine.
Post time: Dec-24-2021